VOX electronics SMX-8023B Manual De Usuario página 5

USING YOUR ELECTRIC STAND MIXER
You must read all instructions carefully before using this appliance.
1. Remove all packing material and please check carefully, making sure that your
Stand Mixer is in good condition. It must have no cracks on the unit and no
damage to the cord/plug. Do not discard any packaging until all accessories
have been found.
2. You must confirm that the voltage indicated on the Stand Mixer corresponds
with the voltage in your home.
3. Remove any adhesive labels or stickers before use.
TO USE YOUR ELECTRIC STAND MIXER
1. Prior to initial use, wash all the parts which come into contact with food.
2. Switch off and unplug the appliance before changing accessories.
3. Select the desired attachments, depending on the mixing task to be performed:
beaters for whisking, mixing and beating, or dough hooks for kneading.
Steps as below:
Install the beaters or dough hooks
Install the hand mixer to the base
Hold the handle of the mixer head
with one hand and place the beater
(dough hook) with the other. Insert it
into the slot, press until it clicks into
position.
The one with gear can only be in-
serted into the right side of the hole
and insert the one without gear to
left side.
Note: The two beaters and two
dough hooks cannot be inserted in
reverse directions.
Align the hole at the bottom of the
hand mixer with the clips on top of
the upper base, and then press the
lock button to assemble the hand
mixer to the upper base until it
"clicks".
Make sure the mixer is placed at a
flat and stable surface.