Cleaning And Maintenance - VOX electronics МX-3005 Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 16
7. When kneading yeast dough, suggest the speed selector first use a low speed and
then use high speed to achieve the best results.
8. When mixing is completed, turn the speed selector to "0" position, unplug the
cord from power outlet.(See Fig.4)
9. If necessary you can scrape the excess food particles from the beaters or dough
hooks by rubber or wooden spatula.
10. Hold the beaters/dough hooks with one hand and press the Ejector button firmly
down with the other hand, remove the beater/dough hooks.
Caution:
1)Food adding, scraper, etc. will be allowed after turning off the moving mixer.
2)In a separate operation, please do not let high-speed beaters or hooks are to others
as this would cause injury.

CLEANING AND MAINTENANCE

1. Unplug the appliance before cleaning.
2. Wait it completely cool down
3. Wipe over the outside surface of the head with a dampened cloth and polish with a
soft dry cloth.
4. Wipe any excess food particles from the power cord.
5. Wash the beaters and dough hooks in warm soapy water and wipe dry.
Fig.3
Fig.4

Publicidad

Tabla de contenido
loading

Tabla de contenido