Cavist 6 Manual De Usuario página 5

IV. ELECTRIC PRINCIPLE DIAGRAM
V. OPERATION OF WINE COOLER
1. Initial Setup
Locate the wine cooler according to the installation limitations. Once
you have plugged the unit into an electrical outlet, let the unit run for at
least 30 minutes before making any adjustments.
2. Temperature Adjustments
a) Your wine cooler has an electric temperature control on the front of
the units. You can set the temperature of your wine cooler at any
setting your desire. The temperature will range from 8 degree to 18
degree. When initially turned on, the LCD will display the ambient
temperature and then the internal cabinet temperature.
b) Pressing the ▲ TEMP button on the display will increase the
temperature and pressing the ▼ TEMP button will lower the
temperature.
c) After you set your desired temperature, the set temperature
numerals will flash for 5 seconds and then revert to the internal
cabinet temperature.
d) Your wine cellar also has a light for your viewing convenience. A light
switch on the control panel will activate the light manually.
Under normal operation it is best for the light to remain off.
e) By pressing the C/F button you can have the temperature readout
either in Celsius or Fahrenheit.