Alarm Setup - König KN-WS210 Manual De Uso

* Press the TIME button again. The DATE digit will flash. Use ▲ or ▼ to adjust
the DATE.
* Press the TIME button again. The DAY digits will flash. Use ▲ or ▼ to set
the DAY.
* Press the TIME button again. The HOUR digits will flash. Use ▲ or ▼ to set
the HOUR.
* Press the TIME button again. The MINUTE digits will flash. Use ▲ or ▼ to
set the MINUTE.
* Press the TIME button again. The TIME ZONE 00 digits will flash. Use ▲ or
▼ to set the TIME ZONE.
* Press the TIME button again to resume to normal display mode.

2. Alarm Setup

* Press and hold the AL button for 3 seconds. When the beep signal goes off,
the hour digits will flash. Use ▲ or ▼ on the back of the weather station to
adjust the hour.
* Press the AL button again. The minute digits will flash. Use ▲ or ▼ to set
the minutes.
* Press the AL button again to save the setting and to return to normal time
display mode.
3. Activate/Deactivate the Alarm Function
In normal display mode, press the "AL" to activate or deactivate the alarm
function. The alarm bell sign (ALM) will appear or disappear accordingly. When
the alarm is set, the backlight will turn on.
4. SNZ/L Button
When the alarm goes off, press SNZ/L to stop the snooze. The alarm will go
off again after 5 minutes. Press SNZ/L in normal display mode to turn on the
backlight for about 5 seconds.
5. ▲ Button
Press the ▲ button in normal time display mode to switch between 12/24 hour
format. AM or PM will be displayed if you have chosen for the 12 hour format.
6. ▼ Button
Press this button in normal display mode to toggle between degrees Celsius
and Fahrenheit.
3
ENGLISH