ASSEMBLY
Always remove the plug from the mains socket before assembling or
disassembling accessories.
Hose
1. To fit the hose, push it firmly into
the hose socket on the front of the
appliance until the hose clicks into
place.
2. To remove the hose, press the
release tabs on the hose sides and
pull the hose out of the appliance.
Connecting tubes and accessories
1. Attach the bigger end of the tubes into the hose handle.
2. Adjust the tubes to your desired length.
Push forward the switch on the tube then adjust. Release the
switch until the desired length is achieved.
3. Attach the desired cleaning accessory to the end of the tube.
To remove the tubes and accessories, hold each piece tightly and pull
firmly apart.
EN-5