Fracarro SIG7404 Instrucciones De Uso página 13

4.1 General information
When the encoder is ON, the LCD display shows the total bitrates::
Verion：ENC-V5.0Lock
SysBitrate：027Mbps
FOUR I N O NE E NCODE
Press ENTER:
TYPE: S IG7404
4.2 Main Menu
To enter the main menu, press ENTER and then MENU:
1 Channel One
2 Channel Two
3 Channel Three
4 Channel Four
5 Network Setting
6 Together Setting
The SIG7404 module has 4 AV input channels; the CVBS video and the R/L audio are available for each channel.
Select the input you want to program (use the UP/DOWN arrows) and enter by pressing ENTER.
4.3 Channel One Configuration (1 Channel One)
To change the digits:
press ENTER to modify the parameter; use the LEFT/RIGHT arrows to select the digit you want to change; use
the LEFT/RIGHT arrows to modify the value, press ENTER to confirm and save the new parameter value.
To change the parameters:
press ENTER to modify a parameter, use the LEFT/RIGHT arrows to select the value you want, press ENTER to
confirm and save the new parameter value.
Use the UP/DOWN arrows to select the menu 1 Channel One, press ENTER to access the menu:
1.1 Video Setting
1.2 Audio Setting
1.3 System Setting
1.4 Muxer Select
4.3.1 Video setting (1.1 Video Setting)
Press ENTER to enter the 1.1 Video Setting menu and select the input video standard:
1.1.1 Video Standard
*AUTO PAL NTSC
Enabling output video:
1.1.2 Video Availab
*yes no
<
<
<
<
<
13