Cleaning, Care & Maintenance; Troubleshooting; Technical Specifications - Caterlite CT057 Manual De Instrucciones

UK
Operation
1. Connect to the mains power supply and turn the power switch On (I).
2. Drop ice cubes into the ice chute to start crushing.
WARNING: The blades of the crusher are self feeding! Do not attempt to push
cubes into blades with hand or instrument.
3. After use, turn the power switch Off (O) and disconnect from power supply.
Ice blockage
1. Should a large cube get blocked in the crushing unit, set the power switch to the OFF position (O)
and unplug the unit.
2. Pour hot water through the ice chute to melt ice blockage.
3. Re-plug and re-start the appliance.
Cleaning, Care & Maintenance
Always turn off and disconnect the appliance from the power supply before cleaning.
•
• Pour hot water through the ice chute to rinse the appliance thoroughly.
• Wipe the appliance housing with a damp cloth. Dry well afterwards.

Troubleshooting

Fault
The unit is not working

Technical Specifications

Model Voltage
220-240V~
CT057
50/60Hz
4
CT057_ML_A5_v3_20201021.indb 4 CT057_ML_A5_v3_20201021.indb 4
Probable Cause
The unit is not switched on
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
Max. Ice
Power Current crushing
capacity
60-80W 1A 12kg/hour
Solution
Check the unit is plugged in correctly and
switched on
Call Caterlite agent or qualified technician
Replace the plug fuse
Check power supply
Call Caterlite agent or qualified technician
Ice
Dimensions
container Weight
H x W x D mm
capacity
12 Cup 3kg 460 x 220 x 170
Largest
ice cube
2 x 2 x 2
cm
2020/10/21 16:05 2020/10/21 16:05