Descargar Imprimir esta página

Notável Móveis PANEL NT 1115 Instrucciones De Montaje página 4

Publicidad

PASSO 17
1 - Encaixe o painel montado no nicho e na parede
através dos suportes;
PASO 17
2 - Fixe os suporte de vidro G na peça 11 e 13 com
STEP 17
os parafusos PA (3,5X14mm);
3 - Em seguida encaixe o passa fio PS na peça 8 e
G
4
13.
4 - Em seguida, fixe a peça 6 na 4 com os
parafusos PF (4X35mm).
1 - Encaje el panel ensamblado en el nicho y en la
PA
4
pared a través de los soportes;
2 - Fije los soportes de vidrio G en la pieza 11 y 13
con los tornillos PA (3,5x14mm);
3 - En seguida encaje el pasa-cables PS en la pieza
PS
2
8 y 13;
4 - En seguida, fije la pieza 6 en 4 con los tornillos
PF (4x35mm)
1 - Fit the assembly panel on niche and wall through
PF 2
the supports
2 - Fix the G glass supports on parts 11 and 13 with
the PA (3,5x14mm) screws.
3 - Them, fit the PS thread guide on part 8 and 13;
4 - Them, fix the part 6 on 4 with the PF (4x35mm)
screws.
11
13
4
6
PF
PASSO 17
PASO 17
STEP 17
M
2
Z
1
X
3
PZ
3
S
1
8
ACOMPANHE A NOTÁVEL MÓVEIS NAS REDES SOCIAIS.
SIGA EL NOTAVEL MOVEIS EN LAS REDES SOCIALES.
FOLLOW THE NOTAVEL MOVEIS ON THE SOCIAL NETWORKS
1 - Fixe puxador S na peça 16 com parafusos PZ
(4X22mm)
2 - Para montar a porta, encaixe as dobradiças M
nos calços M travando-a no parafuso indicado com
número 1 abaixo;
1 - Fije la manija S en la pieza 16 con los tornillos
PZ (4x22mm);
2 - Para ensamblar la puerta, encaje las bisagras M
en los calzos M trabándola en el tornillo indicado
con el numero 1 abajo;
1 - Fix the S handle on piece 16 with the PZ
(4x22mm) screws.
2 - For assembly the door, fit the M hinges on M
wedges locking it on the screw indicated with
number 1 bellow;
16
1
16
/NOTAVELMOVEIS
PASSO 18
3 - Fixe o pistão a gás Z na marcação da peça 1 e
16 como desenho destacado abaixo, utilizando os
PASO 18
parafusos que acompanham o pistão.
STEP 18
3 - Fije el piston con gas Z en la marcacion de la
pieza 1 y 16 como en el dibujo abajo, usando
utilizando los tornillos de acompañamiento del
piston
3 - Fix the Z gas piston on marking of piece 1 and
16 as in the drawing bellow, using the screws that
come with the piston
1
16
PZ
1
16
@NOTAVELMOVEIS
1
PÁGINA | PAGINA | PAGE: 04

Publicidad

loading

Este manual también es adecuado para:

Nt1115Painel nt 1115