Andonstar ADSM301 Manual De Instrucciones página 10

4. Use the 'UP/DOWN' to zoom in/out.
*To switch mode:
1. Press 'M' shortly. (Or press the 'Mode' on the remote)
2. Icons definition in different modes:
: standby mode;
: video playback mode (If the files are videos, press 'OK' to play the video file)
: Lock the file which is being recording
*To set the menu for record mode:
1. Press 'M' for few seconds until on the screen shows the menu. (Or press 'MENU' on the remote.)
2. Press 'UP/DOWN' and use 'OK' to choose what to set.
3. Press 'M' again when you are done.
*To set the menu for system:
1. Press 'M' for few seconds until on the screen shows the menu. Then press 'M' again to get into the system
setting menu. (Or press 'MENU' on the remote twice)
2. Press 'UP/DOWN' and use 'OK' to choose what to set.
3. Press 'M' again when you are done.
*To set the menu for capture mode:
1. Get into the capture mode and then press 'M' .
2. Press 'UP/DOWN' and use 'OK' to choose what to set.
*To capture pictures, three ways:
1.Press 'M' shortly to get into the Capture mode. Press 'OK' to take pictures.
2.Press 'Capture' on the monitor only.
3.Press 'Capture' button on the IR remote to get pictures.
: capture mode; : record mode; : image playback mode
- 9 -