General Use; Use Individually - Andonstar ADSM301 Manual De Instrucciones

①：AV output.(You need a separated AV cable to connect the device to the monitor, when you need to use AV
output. There is no AV cable in the standard configuration)
②：Memory card. (In order to save video files and capture results)
③：USB output. (You need a separated USB cable to connect the device to the PC, when you need to use USB
output)
④：HDMI output. (You need a separated HDMI cable to connect the device to the HDMI monitor, when you need
to use HDMI output)
⑤：Connect the device to the switch.
⑥：Connect the switch to the power supply.
⑦：Connect the two goose lights to the switch.
⑧：The switch. It has three buttons. The one on the left is ON/OFF, to get or break the connection between the
device and the power supply. The rest two are for the two goose lights. The middle one means 'brightness up',
the right one means 'brightness down' . Please do not press the ON/OFF button too often: invertal should be over
10 seconds.

General Use

◆Use Individually

1. According to the instructions given by last chapters, connect the camera to the power supply like⑤⑥⑦.
2. Press the 'ON/OFF' button on the monitor. (Sometimes the camera will switch on automatically when it is
connected to the power supply)
3. Turn on the LED lights, adjust the object distance wheel and the focus controller to get the image that you
want.
- 8 -