Orbegozo PHF 30 Manual De Instrucciones página 9

PHF 30
A
ssembly of the appliance
Description of the Appliance
Fig.1
To assemble, follow these instructions:
- Attach the counterweight inside the base using the 4 screws provided.
- Attach the lower column (11) to the base using the 6 screws provided and then insert the ring
nut (13) and ring (17).
-Connect the intermediate column (9) to the lower one and then the upper one (7), attaching
them with the screws provided.
-Connect the heating part to the upper column and attach it by tightening the knob on the
screw.
- Hook the electric cord to the ring.
- Fix the base on the ground to keep stable. And there are three base fixings (16) to fix the base
by screws to the ground.
Maximal Height: 2.1 m
You can choose the short version, while you join direct the Upper Post Assembly (7) and the
Lower Post Assembly (11).
Fig 2
1)Heating part
2)Knob
3)Body
4)Display
5)Pull switch
6)Column-locking ring
7)Upper telescoping column
8)Screws
9)Intermediate column
10)Screws
11)Lower column
12) Power cord
13)Base cover
14)screw
15)Base Assembly
16) Base fixing
17）ring with cord stop
9