Ecoflam E-BCU Diagnostic tool Manual De Uso página 8

EN
Service
The phone number and the contract ID will
appear if the service center has recorded
them.
To modify the phone number:
• Enter the fault menu pushing BP1, scroll
menus (again by BP1) untill the desired
pittogram appears.
• Press BP2 to modify the number, the first
digit is flashing.
• Increase the value using BP1 button.
• Confirm the value using BP2 button.
• Repeat untill last digit has been modified.
After last digit has been confirmed, the
complete pittogram appears for 5 sec.,
than the display shows functioning
screen.
8 www.ecoflam-burners.com
BP2
BP1
To modify the Customer ID:
• Enter the fault menu pushing BP1, scroll
menus (again by BP1) untill the desired
pittogram appears (Contract number).
• Press BP2 to modify the number, the
first digit is flashing.
• Increase the value using BP1 button.
• Confirm the value using BP2 button.
• Repeat untill last digit has been
modified. After last digit has been
confirmed, the complete pittogram
appears for 5 sec., than the display
shows functioning screen.
R: lock-out reset button +
led for lock-ot signal
Historical infos about burner funtioning and
lock-outs are stored inside the burner
BCU. To reset that memory press the R
button on BCU longer than 15 sec.
• Service phone number.
• Customer reference number.
420010145602