DeWalt DW130V Manual De Instrucciones página 25

cleaning the non-metallic parts of the tool. These chemicals may
weaken the materials used in these parts. Use a cloth dampened only
with water and mild soap. Never let any liquid get inside the tool;
never immerse any part of the tool into a liquid.
Repairs
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment (including brush inspection and replacement) should
be performed by authorized service centers or other qualified service
personnel, always using identical replacement parts.
Accessories
WARNING: Since accessories, other than those offered by
D WALT, have not been tested with this product, use of such
E
accessories with this tool could be hazardous. To reduce the risk of
injury, only D WALT, recommended accessories should be used with
E
this product.
Recommended accessories for use with your tool are available at extra
cost from your local dealer or authorized service center.
For safety in use, the following accessories should be used only in
sizes up to the maximums shown in the table below.
MAXIMUM RECOMMENDED CAPACITIES
Drill Capacity
RPM
Steel twist bit
Auger
Self-feed
Spade
Wood holesaw
Steel holesaw
5/8" 16 mm
0-550
5/8" 16 mm
1-1/2" 38,1 mm
3" 76,2 mm
1-1/2" 38,1 mm
5" 127 mm
4" 101,6 mm
23
Protecting the Environment
Separate collection. This product must not be disposed of
with normal household waste.
Should you find one day that your D
replacement, or if it is of no further use to you, do not dispose of it
with household waste.
Separate collection of used products and packaging allows
materials to be recycled and used again. Re-use of recycled
materials helps prevent environmental pollution and reduces
the demand for raw materials.
Local regulations may provide for separate collection of electrical
products from the household, at municipal waste sites or by the
retailer when you purchase a new product.
D WALT provides a facility for the collection and recycling of D
E
products once they have reached the end of their working life. To take
advantage of this service please return your product to any authorized
service center that will collect them on our behalf.
You can check the location of your nearest authorized service center
by contacting your local D WALT office. Alternatively, a service center
E
listing is included in the packaging of this product.
SPECIFICATIONS
MODEL
Voltage:
Power:
Frequency:
No load speed:
WALT product needs
E
WALT
E
DW130V-B3
120 V
710 W
50–60 Hz
n o 0-550/min