EUROM MULTICLIMA 70 Manual De Instrucciones página 24

OPERATION
Via the control panel on the
air conditioner
Functions:
1. ON/OFF button
Switch the unit on or off
using this button.
2. Function selection
Press once or more on this
button to select a function:
cool (a), dehumidify (b) or
heat (c). If you wish to
dehumidify, first connect the
water outlet (see page 7!
3. Temp. regulation up▲
During cooling: every time you
press this button, the set temperature will increase by one degree
up to a maximum of 30°. During heating: every time you press this
button, the set temperature will increase by one degree up to a
maximum of 25°.
4. Temperature regulation down ▼
During cooling: every time you press this button, the set temperature
will decrease by one degree to a minimum of 17°. During heating:
every time you press this button, the set temperature will decrease
by one degree to a minimum of 15°.
5. LED-display
The display shows whether power is connected and the temperature
or timer settings. If settings are amended, the display will show the
new setting and then revert back to displaying the set temperature.
The display also shows error codes, see later in the leaflet.
6. Speed
Select fan speed with this button: low, medium, high or automatic. If
you choose 'automatic' (during cooling), the device will select low,
medium or high depending on the degree of cooling required.
Note: the speed button does not work during the heating or
dehumidifying process; the correct setting is selected automatically
(high for heating or low for dehumidifying).
24