Taurus 3-SIDE SHAVE Manual De Instrucciones página 10

- Go against the direction of the facial hair growing, or shave in the
same direction if your skin is sensitive.
- For trimming the sideburns and moustache, push down the pop-up
trimmer slider (H) and move it downwards applying gentle pressu-
re. (Fig. 1)
ONCE YOU HAVE FINISHED USING THE APPLIANCE:
- Turn the appliance off using the on/off button.
- Clean the appliance.
- Put on the protective cover.
CLEANING:
- Disconnect the appliance from the mains and allow it to cool befo-
re undertaking any cleaning task.
- Clean the equipment with a damp cloth with a few drops of
washing-up liquid and then dry.
- Do not use solvents, or products with an acid or base pH such as
bleach, or abrasive products, for cleaning the appliance.
- Never submerge the appliance in water or any other liquid or place
it under running water.
- During the cleaning process, take special care with the blades, as
they are very sharp.
- If the appliance is not in good condition of cleanliness, its surface
may degrade and inexorably affect the duration of the appliance's
useful life and could become unsafe to us.
- For a deep cleaning:
- Press the release button to open the shaving unit (Fig. 2).
- Turn the lock counterclockwise
remove the retaining frame (Fig. 3.)
- Remove and clean one shaving head (B) at a time (Fig. 4 & 5).
- Clean the cutter with brush (I) (Fig. 6) and install them on the
shaving unit.
- Put the retaining frame back into the shaving unit and turn the
safety lock clockwise.
- Attention: Do not clean more than one cutter at a time, since they
are all matching sets. If you accidentally interchange the cutters, it
could influence the shaving results.

and then pull upwards
‚
to