SUOMY SR SPORT Manual De Instrucciones página 32

USE and MAINTENANCE
Eng
NOSE GUARD
Removal
The nose cover is snapped into place between the cap and the inner lining of the chin guard. To remove it, all you have to do is pull it upwards.
Assembly
Place the nose cover in the middle of the visor's opening, inserting the tabs between the cap and the chin guard. Press with force on the nose
cover where the tabs are located until the lower edge of the nose cover is fully adherent to the edge of the cap.
If this doesn't happen and the nose guard does not adhere to the
edge of the shell or is not positioned correctly, do not use the
helmet and contact authorized Suomy personnel only.
30
see Figure 12
figure 12