Publicidad
Idiomas disponibles
Idiomas disponibles
These instructions are part of the Duravit
product and must be read carefully and kept
available at all times.
Target readership and qualifications
The product may only be installed by a qualified
plumber.
Explanation of the key words
Indicates a hazardous
CAUTION
situation which, if not
avoided, could result in minor
or moderate injury.
Addresses practices not
NOTICE
related to physical injury.
Technical data
Operating pressure
Recommended
Test pressure
1 MPa = 10 bar = 145 PSI
Hot water temperature
For use with showerheads rated at 6.1 l/min
(1.6 gpm) or higher.
This unit meets or exceeds the
following:
• ASME A112.18.1
• CSA B125.1
• ADA Compliant
4
MAL_57165/19.03.2
Safety instructions
Cut and crush injuries
> Wear gloves when installing the product.
Product and/or property damage
> Observe the local installation regulations and
> Equalise pressure differences between cold
> Observe the manufacturer's instructions for
max. 72.5 PSI
43.5 PSI
72.5 PSI
max. 140 °F
any country-specific standards at all times.
and hot water connections.
installation with continuous flow heaters.
Publicidad
