babymoov A014200 Instrucciones De Uso página 18

b. Use the buttons (12) (13) ▲▼ to configure the "Out of range" alert function; the configuration must be identical
to the transmitter's. If the configuration is different the alarm may go off for no reason or inversely not go off at
all even if the receiver is no longer in range of the transmitter. If the appliance is associated with 2 transmitters
the configuration must be identical to that of the transmitter with the corresponding number.
or
c. Press the "Menu" button (14) to confirm the selection. (If you have selected "On"
the "Out of range" alert icon appears on the screen in normal mode). This is what
is displayed on the screen:
d. By means of the buttons (12) (13) ▲▼ set the maximum temperature above
which the appliance must set off an alarm. If you press the buttons briefly the
temperatures appear degree by degree in turn. If you keep the buttons (12) (13)
down the temperatures appear more rapidly. You can select temperatures
ranging from -3 °C to +50 °C. If you have selected "Off" no maximum temperature
is defined. Press the "Menu" button (14) to confirm the selection. This is what is
displayed on the screen:
e. By means of the buttons (12) (13) ▲▼, rset the minimum temperature below which
the appliance must set off an alarm. You can select temperatures ranging from
-8 °C to +44 °C or 2 °C below the maximum temperature chosen. If you have
selected "Off" no minimum temperature is defined. Press the "Menu" button (14) to confirm the selection; the screen
returns to normal mode.
f. Note that the maximum and minimum temperature configuration is identical for both transmitters.
g. In stand-by mode briefly press the "Menu" button (14) to display the configuration of the "Out of range" alert and
temperature alarm.
2. Place the receiver at a reasonable distance from the transmitter to avoid feedback. If the receiver is too close the
speaker may produce a strident sound (18).
3. When the receiver receivers a signal the screen comes on and the sound level indicator LEDs light up. The higher
the sound level of the child's voice the larger the number of LEDs that light up. This function is useful when the
parents prefer to switch the speaker (18) off for peace and quiet.
Depending on which transmitter sends the signal the "Baby Unit 1" (19) or "Baby Unit 2" (20) indicator light comes on.
4. The volume of the speaker (18) can be adjusted with the buttons (12) (13) ▲▼. On the screen the number of bars
indicating the volume also changes depending on the level chosen: the higher the number of bars, the louder the
volume of the speaker (18). When no bar is displayed and the icon
5. If the receiver has been connected to function with 2 transmitters, Baby unit no. 1 always has priority. This means
that if the receiver is already in transmission with Baby unit no. 2 and Baby unit no. 1 starts to send, the receiver
then switches immediately to Baby unit no. 1 until the end of the transmission; it only resumes the transmission
with Baby unit no. 2 afterwards.
6. In order to prevent the parents from missing the signal from Baby unit no. 2 if it starts transmitting when the receiver
is already in transmission with Baby unit no. 1, the indicator light for Baby Unit 2 (20) flashes to warn them. If the
parents want to listen to the transmission of Baby unit no. 2 they can switch to the latter by briefly pressing the
"Menu" button (14). The "Baby Unit 2" indicator light (20) then lights up while the "Baby Unit 1" indicator light (19)
starts flashing (if the first child continues to cry). To switch back to Baby unit no. 1 it is enough to press the "Menu"
button (14) again. In this way it is possible to monitor two children at the same time.
7. In stand-by mode, if there are 2 transmitters the screen displays each transmitter's temperature and charge for 15
seconds alternatively. When one of the transmitters starts to transmit the receiver receives the transmission
immediately and displays the information concerning the transmitter in question until the signal comes to an end.
18
BABYPHONE DIGITAL GREEN • Instruction Manual
appears the speaker (18) is cut completely.