Starting Operation - Bosch GAS18V-02 Instrucciones De Funcionamiento

2610052956_GAS18V-02 5/7/19 8:58 AM Page 10
any assembly, adjustments or changing
attachments. Such preventive safety
measures reduce the risk of starting the
tool accidentally.
EPA Lead Based Paint Renovation,
Repair and Painting Program (RRP),
where lead may be present. Using this
vacuum cleaner for EPA RRP program
may cause health and environmental
hazards.
substances or dusts, e.g., asbestos. The
standard filter is not able to capture all
hazardous particles, which may cause
health hazards.
other materials that include silica. The
filter is not able to capture all silica dust,
which may cause health hazards.
Ensure that the work area is clean and
tidy to minimize the risk of tripping.

▶ Starting Operation

Before vacuuming, ensure that the
filter assembly is assembled securely.
Only use an undamaged filter (no
cracks, small holes, etc.). Replace a
damaged filter immediately. See
"Cleaning/replacing filters".
▼ EMPTYING THE DUST CANISTER
Empty the dust canister 7 after each use
in order to ensure that the vacuum
cleaner continues to perform optimally.
- Switch the unit off and remove the
battery pack (See "Inserting and
Releasing Battery Pack").
- Hold the vacuum cleaner over a
suitable waste bin.
- Press the release button 8 to open the
emptying flap 9 (Fig. 5).
- Shake out the dust canister 7.
- Close the emptying flap 9 until you
hear it click into place.
- Clean the coarse filter 1 (see
10
Operating Instructions
Remove the battery
pack before making
Do not use this
vacuum cleaner for
Do not use to vacuum
hazardous or toxic
Do not use to vacuum
concrete dust and/or
Fig. 5
"Emptying the coarse filter") if
required.
- If necessary, clean the filter (see
"Cleaning/Replacing Filters").
▼ EMPTYING THE COARSE FILTER
Fig. 6
Fig. 7
7
8
9
1
7
7
1