CRH Leviat HALFEN HUC Instrucciones De Montaje página 4

HALFEN HUC
Assembling example
6. HALFEN HSC-B Connection must
be installed in accordance with the
engineer's specifi cation. It is re-
commended to attach it with ma-
gnets to steel formwork or by nai-
ling to wooden formwork.
Observe the diff erent
!
edge distances of the
bolt holes in the
positioning plate and
the face plate
Positioning plate
Face plate
d
1
d
2
4
Alternative:
Fixing to formwork by screwing
(formwork penetration);
the positioning plate must be fl ush
with the formwork
© 2020 HALFEN · INST_HUC 09/18 · www.halfen.com
Assembly Instructions
7. The column and additional rein-
forcement are installed according
to the design drawings provided
by the structural engineer.
8. To secure the position of the
HSC-B Connection bars they must
be wire-tied to the longitudinal
column reinforcement.