Introduction - unGer HiFlo DI400 Instrucciones De Montaje Y Manejo

Introduction

When choosing Unger complete desalination as water treatment system,
you have decided in favour of a high-quality product.
Complete desalination is based on the principle of ion exchange.
The minerals responsible for producing hardness and the conductivity (TDS value) are
removed from the water.
The application of this treatment filter has the following advantages:
• A water-fed pole and a brush are all that is needed for glass cleaning.
• Prior to system installation and start-up it is essential that you observe
the safety regulations and instructions for installation and maintenance
contained in these instructions.
• The manufacturer is not liable for the function of the device:
• When handling is not in compliance with regular use.
• When used for applications not mentioned in the manual
(use other than intended),
• When failing to comply with safety regulations.
There is a risk of damage to the treatment filter if:
• Operating and installation errors..
• Bottle is opened incorrectly other than by Unger.
• Replacing connections and hoses, other than by Unger.
• Replacing spare parts that are not included in the official Unger
spare parts pricelist.
• Performing unauthorised modifications to the design.
• Non-compliance with safety regulations (e.g. anti-freeze protection).
• Use of chemical additives.
• Insufficient maintenance.
All maintenance and repairs are to be performed by a specialist.
Use only original spare parts by Unger (according to spare parts list).
For all inquiries and spare parts orders it is important to provide detailed
information on the device.
H F ™ Di r
i lo
Introduction
www.ungerglobal.com
F
esin ilter
11