Initial Power-Up Display; User Interface - ETC SmartPack Manual Del Usuario

Initial Power-up Display

The first time you apply power to the SmartPack you will be asked
to choose a language for the operating system.
The language options cycle through the following four options at
three second intervals. Press to
Set Language - English
Choisir la langue - Français
Sprache auswählen - Deutsch
Seleccionar idioma - Español
S m a r t P a c k B a s i c F e a t u r e s
Set DMX start address:
1. Scroll to DMX, press
2. Scroll to DMX Start Address, press
3. Use + or - to set Start Address
N o r m a l M e n u
The normal menu is used to view system status and to set the
DMX start address for SmartPack. The start address range is
determined by the size of your SmartPack.
Start Address range:
6 channel pack:
12 channel pack:
DMX: 001 > 012
Level:
DMX
[
DMX Start Address
General Settings
Software Version
Menu Mode
Diagnostics
T e s t M e n u
To enter the Test menu, press
Test Dimmer: [ All ]
Level: 100%
To set a level for a dimmer:
1. Use + or - to select one or All dimmers, press
2. Use + or - to set a level.
• To exit Test menu and retain all Levels, press <<
• To clear a Level and return to the previous menu, press <
• To retain all Levels and return to the previous menu, press
2
select an option.
001-507
001-501
Advanced
T

User Interface

+
<
-
<<
Use the + and - keys to increase / decrease a value or scroll
through menu choices.
<< Returns you to the Home menu item
< Moves Back one menu item
Accepts a menu choice or stores a value
[ ] Indicates an item can be selected
> < Indicates selected item
Activates the Test menu
L C D D i s p l a y
DMX: 001 > 012
Level:
The Control Symbol indicates the current
control source.
= DMX
D
= Preset
P
= Sequence
S
= Test
T
A d j u s t i n g t h e C o n t r a s t o f t h e L C D
D i s p l a y
Press and hold the << button and use the + and - buttons to adjust
the contrast of the LCD display.
D M X
D
Control Symbol
English Anglais Englisch Inglés