sylvac S Dial WORK Smart Instrucciones De Uso página 12

E
- It is also possible to display the tolerance limits when the instrument is operating in MIN, MAX or DELTA (TIR) mode.
- If no tolerance limits have been defined by the user, the instrument will only display the tolerance limit indicators
but will not turn on the indicator lights (red - green - yellow).
6. Bluetooth
configuration (depending on model)
®
The connection procedure has been designed to be simple and is signalled by the following three states:
° Symbol off ............. disconnected mode
° Symbol blinking ...... advertising mode
° Symbol on .............. connected mode
The following options can be selected to control the Bluetooth
On
Enable Bluetooth
OFF
Disable Bluetooth
rESEt
Clear pairing information.
MAC
Display the MAC (Media Access Control) address.
® module (start advertising mode).
® module (terminate active connection).
® module.
12
OK