Setting The Recording Level Manually - Panasonic RR-XS410 Instrucciones De Funcionamiento

Setting the recording level manually

The recording level can be adjusted automatically or manually on this unit. When the recording level
adjustment is AUTO, the sound distortion is reduced by adjusting the recording level automatically. To
record the original sound volume level faithfully such as an instrument playing and nature sound, set the
recording level adjustment to MANUAL. (The factory setting is "AUTO".)
Setting the recording level
adjustment to MANUAL
• Press [g STOP/RETURN] to stop the unit.
1
Press [MENU].
2
Press +, – to select "MIC REC MENU"
and press [q OK] to enter.
3
Press +, – to select "REC LEVEL
ADJ." and press [q OK] to enter.
4
Press +, – to select "MANUAL" and
press [q OK] to enter.
To exit the setting screen, press
[F2 (CLOSE)].
The recording level is
displayed.
22
22
Adjusting the recording level
manually
• Set the recording level adjustment to MANUAL
beforehand. (When the recording level
adjustment is AUTO, the unit does not enter
the recording standby.)
1
Press and hold
[* REC] for 1
second or more.
The unit enters the
recording standby.
2
Aim the microphone at the sound
source to record.
3
Press u, i to adjust the
recording level (➜ page 23).
Adjustment range is 0 to 30.
(The factory setting is "15".)
Pressing [* REC] starts recording.
g STOP/RETURN
F2
* REC
MENU