Gas Connection; Connection Of Fume Exhaust Vent - Angelo Po 0N0FT1G Manual De Uso

Important
Those authorised to carry out this operation
must have experience acquired and certifi ed
in the specifi c sector, must make the connec-
tion to the proper standards, and must com-
ply with all the relevant regulations and leg-
islation. Once the connection has been made,
before the appliance is put into operation a
general check must be made to ensure there
are no gas leaks.
To make the connection, connect the mains line
to the appliance's connection pipe, fi tting a shut-
off tape (A) , to allow the gas supply to be cut off
when necessary.
Important
The tap (A), not supplied with the appliance,
must be installed in an easily accessible posi-
tion and its status (on or off ) must be obvious
at a glance.
Important
The gas supply pipe must comply with the na-
tional requirements in force and must be peri-
odically examined and replaced if necessary.
GB
Important
Make the connection in compliance with the
relevant legal requirements, using appropri-
ate and recommended materials.
Position the appliance
1)
underneath the hood (A)
(see diagram).
Important
The gas supply tap (A) must
open automatically when
the fan of the extraction sys-
tem is switched on.
3269771_inst_GB

GAS CONNECTION

CONNECTION OF FUME EXHAUST VENT

A
- 10 -
A
Connecting to a fan extractor hood
To carry out this operation, proceed as follows.
A
ENGLISH