VENTILAIRSEC VMI PULSE’R Prestige 2 Manual De Uso página 45

Set temperatures' setting screen
Status screen
System test activation screen
To choose the Hydro'R set preheat temperature.
Select the temperature with the
pressing
Electric mode.
Used to choose the resistors' operating mode. The electric
preheating is activated if it is not possible to reach the required set
supply air temperature with the Hydro'R system:
- Cold (F) = 4°C
- Economic (E) = 15°C
- Comfort (C) = 18°C
Tip: for the most economic preheating, use the
4°C mode*
*this may lead to cold supply air
Shows the Hydro'R system's supply air temperature.
Once the test has finished, the system status is displayed
In case of abnormal functioning, please contact your installer
buttons and confirm by
Hydro'R's temperature
status
probe
44