Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Playing a record
- The TURNTABLE PLAYER operates using DC 5V power via the
USB port on your computer.
- Raise the dust cover and push it back far enough until it stays
upright.
- Turn the volume control to turn on.
- Release the Security latch from the tone arm by moving it to
the right.
- Place the record to be played on the turntable.
- Select the correct playing speed for the record (33, 45 or 78
rpm) using the
- Speed control switch located neat the tone arm rest.
- Push the cue lever back to raise the tone arm.
- Moving the arm from its rest will start the turntable rotating.
- At the desired point on the record, pull the cue lever forward to
lower the arm.
Publicidad
Tabla de contenido
