Panacom LP-8790 Manual Del Usuario página 21

- Use the file, Edit, View, Tracks, Generate, Effect and Analyze
menus to Save, Export and Manipulate your music.
- If the recording level requires adjustment, click on Apple icon
'System Preferences' and select 'SOUND' , click on the USB PnP
Audio Device and adjust the Output Volume as required. Move
this control up if the recording is too quiet and down if the
recording is too loud
NOTE: The blue wave form should sit in the Audacity window
such that the peaks of it stop short of the top and bottom
- Before editing your music, the recorded waveform will need to
be highlighted.
- To highlight your wave form select it with the mouse and
double click the mouse and the waveform will go darker.
- At this point the whole waveform can be edited. However if
only a section of the waveform needs to be edited (or saved) the
section required can be highlighted by placing the mouse over
the beginning of the section holding the left button down and
dragging it right over the area required and releasing it when
the end of the desired section is reached. This darkened section
will now be the only audio that will be edited.
- Alternatively click on the EDIT menu at the top left and then
click on SELECT then choose from: All (whole wave form), Start
to Cursor or Cursor to end.
NOTE: after recording to the Computer, the USB cable may
have to be removed from the USB port in order to enable
playback later from the Computer.
Pg. 21