Metabo HPT UC 18YTSL Manual De Instrucciones página 14

English
(1) Select a charging method
Depending on the charge method selected, either the battery is inserted into the charger or
the power cord is plugged into an outlet.
○ Charging a USB device by battery (Fig. 5-a)
○ Charging a USB device from a electrical outlet (Fig. 5-b)
○ Charging a USB device and battery from a electrical outlet (Fig. 5-c)
Order of priority
a
NOTE:
When charging a USB device from a rechargeable battery, insert the rechargeable battery
into battery charging port No. 1. (Fig. 3)
(2) Turn the USB power switch ON (Fig. 6)
When you turn the USB power switch ON, the USB power indicator lamp will light up.
USB port
USB cable
Rubber cover
(3) Connect the USB cable. (Fig. 6)
Pull back the rubber cover and fi rmly plug in a commercially available USB cable
(appropriate to the device being charged) into the USB port.
○ When the power cord is not plugged into an outlet and the battery runs out of power, power
output will stop and the USB power indicator lamp will shut off .
○ When the USB power indicator lamp goes out, change the battery or plug the power cord
into an electrical outlet.
14
1
b
Fig. 5
Fig. 6
c
USB power switch
USB power indicator lamp