Configuration - Velleman CAMIP15 Manual Del Usuario

CAMIP15

Configuration

1. There's an App for That
To get started, download the Seedonk app from Apple's App
Store (iPhone, iPad) or the Google Play market (Android).
2. Connect the Camera
(See fig. 2)
Plug the included power adapter into the camera and
connect it to a power socket.
3. Wi-Fi Setup Mode
(See fig. 3)
Make sure that the Wi-Fi setup switch on the back of the
camera is set to ON.
4. Connect the Mobile Device to the Camera
On your mobile device, go to Settings > Wi-Fi, and
connect to the IPCAM wireless network.
(See fig. 4)
5. Launch the Seedonk App
Once your mobile device establishes the connection to the
IPCAM (this takes about 30 seconds), launch the Seedonk
app. (See fig. 5)
The Seedonk app automatically detects your camera. When
prompted, click Yes to set up your camera.
V. 01 – 11/07/2012 18 ©Velleman nv