Sinmag Europe SM705E Manual Del Usuario página 3

1. INSTALLATION
1.1. The oven is ready for installation. It should be installed in a dry and
ventilated place on a table or stand.
1.2. Select a horizontal and plain floor to install the oven. The space
between the oven and the wall should be more than 30 cm, and
the space between the back side of the oven and the wall should be
more than 50 cm.
1.3. The oven can be placed on the electric deck oven SM-941F, or on the
prover SM-716F(B) or on a stand.
1.4. Connect the correct electric supply to the oven, as indicated on the
identification plate.
1.5. Turn on the main switch and then check all the components of the op-
eration panel, including thermostats, indication lamps, timer, lighting
and switches to ensure their normal working status.
1.6. Turn off the main switch and shut off the electric supply.
SINMAG EUROPE BVBA
ENG
3