Sinmag Europe KM-25 Manual Del Usuario página 6

ENG ENG
ENG
4. Operation of the spiral mixer by means of the
touch digital panel
4.1
Description
4.1.1
Timers
The timers are located at the upper side of the panel. Timer I is for
reverse direction, timer II for first speed, timer III for second speed.
The timers are set by means of the
+
once, the set time will increase by 10 seconds. The maximum time
that can be set is 20 minutes. After 20 minutes, the timer will start from
0 minutes again.
Press the
When the spiral mixer is switched ON , the timers will indicate the set
time. When the timer starts to work, the time indicated on the timer will
be reduced 10 seconds at a time until it reaches 0.
When the safety cover is raised during AUTOMATIC operation, the
timer will stop at the current position. When the spiral mixer restarts
after such a stop, the timer will continue from the current position to
finish the remaining time.
During MANUAL operation, the timer will
not work.
When the OFF -key is pressed, the timers
will return to the set time.
6
-
key for reducing the set time by 10 seconds.
+ -
and -keys. If you press the
Safety cover open
SINMAG EUROPE BVBA