Electrical Connection - HAEGER FH-15C.012A Instrucciones De Uso

English

Electrical Connection

Before plugging in the heater, check that the voltage of your domestic
–
supply corresponds to the voltage (V) indicated on the appliance.
Check that the electrical socket has a rating of 10/16 Amps.
–
Instructions for use
Installation
The appliance requires no installation; it should be used solely as a portable
appliance. Portable appliances are not suitable for use in a bathroom.
Function Switch
0 = OFF
= Only ventilation
I = Heating at reduced power (750 W)
II = Heating at full power (1500 W)
Operation
– Plug the appliance into the mains.
– Turn the thermostat knob (2) clockwise to its maximum position (MAX).
– Select the desired power with the function switch (4).
– When the room reaches the desired temperature, turn the thermostat
knob (2) anti-clockwise until the control light (1) switch off which indicates
that the thermostat has been disconnected.
– Leave it in that position and the thermostat will maintain the selected
temperature with the consequent energy saving.
– When the heater is not in use, turn the function switch to the off position
and the thermostat to the minimum position and unplug the appliance.
Only ventilation (
– If you would like to use the device as a ventilator, move the function
switch to the ventilator symbol and turn the temperature control to the
highest position.
Oscillation (swing switch
– Press the
4
)
button to swing on, press again
)
to swing off.
Instructions for use