Descargar Imprimir esta página

Maintenance And Troubleshooting - Mesis JoySense 2.0 Manual De Usuario

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

User Manual: JoySense

Maintenance and Troubleshooting

The accessories cannot be repaired, as such take care of them.
Do not place the leggings, armband, abdominal belt or other accessories
close to direct or indirect sources of heat.
Do not place the equipment in damp or wet areas. Do not soak the equip-
ment in any way, do not pour any liquid over the equipment.
Do not wash the equipment and accessories with water or detergents.
Simply wipe with a damp cloth.
Do not place the equipment and its accessories in very cold areas or
areas below zero degrees centigrade. It could cause serious damage.
If you don't use the device for a length of time, place it back in its box.
Environment of use and safekeeping
• Use and maintain the device and its accessories in a clean environment and at a
temperature between 10 – 40 °C, and humidity of 30 – 85%;
• Do not use outdoors.
Problem found
The machine does not
turn on
If you hear a strange his-
sing sound similar to an
air outlet
The air does not flow to
the applicators, there is
insufficient intensity
The air continues to flow
into the chambers and
you hear an air leak in
the applicators
Index
Index
2.0 e JoySense
3.0
®
®
Possible solution
• Check that it is correctly connected to the mains;
• Check that you have inserted the air tube connector to the machine;
• Check the condition of the power cord. It must be intact.
• Check that the tubes, accessories and connectors are intact;
• Check that all the connections (to the machine and the applicators)
have been correctly inserted;
• Check that the air connection tubes are not bent, squashed or crus-
hed.
• Check that the connectors to the machine and the applicators are
correctly connected;
• Check that the air connection tubes are not bent, squashed or crus-
hed;
• Check that the chambers have inflated properly and progressively
in accordance with the selected program.
• Check for holes or damage in the applicators' air chambers. If no
anomalies are detected, switch off the device, switch it back on and
check that it is working properly again
41
English

Publicidad

loading

Este manual también es adecuado para:

Joysense 3.0Js02Js03