Remote Control Instructions - M Confort MOON Manual De Usuario

Installation with stand
Noted: If the heater with tip over function, with 45º angle, once heater over the angle, the
heater will be automatically stop working.
Remote Control Instructions
1. POWER BUTTON: Turn the heater off.
2. DOWN BUTTON: Decrease temperature, timer and level.
3. UP BUTTON: Increase temperature, timer and level.
4. LEVEL BUTTON: U se to adjust the 2P heat levels(P1-P2). Press the Level button then use the up
and down buttons(buttons 2 and 3) to increase or decrease the heating level.
5. TIMER BUTTON: To set the timer from T0-T9, which is the number of hours it wi ll run. T0 will
display and then adjust to the number of hours you would like t o set, using the up and down
buttons(2 and 3).
Noted: All SUNDEAR MOON heaters a nd their remote controls have the same frequency, so it is
possible to control several heaters with just one remote.
PUSH BUTTON: on the right end of heater, it could be manual ope rated without remote control.
Inserting Batteries
Insert 2 AAA/ Alkaline type batteries into your remote control
1. Flip the backside of your remote control and pull out battery c over. Insert the batteries in
accordance with the instructions and polarity the batteries.
2. Change the batteries in the same way depicted above.