Mounting The Wtx 200 I/O Board Add-On Module - hafele WT 200 Instrucciones De Montaje

5.4 Mounting the WTX
200 I/O board
add-on module
Fig. 21: Add-on module with jumpers
1. Place the jumper on the add-on module for installation option 5 (Fig. 47c/p. 118).
Additional information and examples
• See "Structure and pin assignment of the WTX 200 I/O board"
on page 86.
• See "Assignment options for the additional connections at the
6 controller screw terminals" on page 87.
• See "Use of the add-on module for 4 additional analogue/
digital input ports" on page 88.
• See "Use of the add-on module for 2 additional relay output
ports and 1 additional analogue/digital input port" on page 89.
2. Attach the spacer to the controller (Fig. 22/1) on the add-on module (4x supplied).
Fig. 22: I/O board spacer
83