Assembly; Fuelling - AL-KO Classic 4.65 SP-B Plus Manual De Instrucciones

„ Remove cuttings only when the motor has stopped
„ Switch off the motor / mower blade when passing
over areas other than those that have to be mowed
„ Never lift or carry the equipment while the motor is
running
„ Do not eat or drink when topping up the petrol or
motor oil
„ Do not inhale the petrol fumes
„ Move the machine at walking speed
„ Before use, ensure that all nuts, screws and bolts
are securely fastened.

Assembly

Follow the accompanying assembly instructions.
Caution!
The equipment can be used only after complete
assembly.

Fuelling

Fill the lawnmower with fuel before the initial startup.
Warning - risk of fire!
Petrol and oil are highly inflammable!
Always observe the operating instructions sup-
plied by the motor manufacturer.
Operating fluids
Petrol
Grade
Regular petrol /
unleaded
Filling Refer to the motor
capacity
manufacturer's
instructions
Safety
Warning!
Never leave a motor running in an enclosed
space. Toxic hazard!
„
470 591_e
Motor oil
Refer to the motor
manufacturer's
instructions
about 0.6 l
„ Store petrol and oil only in containers intended for
this purpose
„ Only add or drain oil in the open air, and when the
motor has cooled down
„ Do not add petrol or oil while the motor is running
„ Do not overfill the tank (petrol expands)
„ Do not smoke when refuelling
„ Do not open the tank lock when the motor is
running or when hot
„ Replace the tank or tank lock if damaged
„ Always close the tank cap firmly
„ If petrol has been spilt:
Do not start the motor
„
Do not start the equipment
„
Clean the equipment
„
„ If motor oil has been spilled:
Do not start the motor
„
Soak up the spilled oil with an oil binding agent
„
and dispose of appropriately
Clean the equipment
„
Used oil should not be:
„ disposed of with domestic rubbish
„ poured into the sewage system, drains, or
onto the ground
We recommend to collect the used oil in a closed
container and to deliver it to a suitable recycling or
service station.
Adding petrol
1. Unscrew the tank cap, and keep in a clean place.
2. Pour in petrol using a funnel.
3. Firmly replace the cap on the filler opening and
clean it.
Adding motor oil
1. Unscrew the filler cap, and keep in a clean place.
2. Pour in oil using a funnel.
3. Firmly replace the cap on the filler opening and
clean it.
GB
25