Changing The Filters; Warranty And Technical Assistance - Mellerware Rider 2.0 Manual De Usuario

CHANGING THE FILTERS:

- Air entry filter, it is advisable to be changed
at least once a year or every 50 hours of the
appliance's use.
TO REMOVE THE FILTERS:
- Disconnect the dust box from the appliance
(Fig.2).
- Open the lid of the dust box. (Fig.3).
- Remove the filter from its housing (Fig.4).
- Wash the protective filter under the tap with
lukewarm water, soak it like a sponge and let it
dry 24 hours.
- Shake the HEPA filter in the garbage can. If
necessary, you can wash it under the tap with
lukewarm water and let it dry 24 hours.
- To reassemble the filter, proceed with the above
instructions, in reverse order.
SUPPLIES
- Supplies can be acquired from distributors and
authorised establishments (such as filters, etc...)
for your appliance model.
- Always use original supplies, designed specifi-
cally for your appliance model.
- These supplies are available in specialist shops.
ANOMALIES AND REPAIR
- Take the appliance to an authorised technical
support service if product is damaged or other
problems arise. Do not attempt to disassemble
or repair the appliance yourself as this may be
dangerous.
FOR EU PRODUCT VERSIONS AND/OR IN
CASE THAT IT IS REQUESTED IN YOUR
COUNTRY:
ECOLOGY AND RECYCLABILITY OF THE
PRODUCT
- The materials of which the packaging of this
appliance consists are included in a collection,
classification and recycling system. Should you
wish to dispose of them, use the appropriate
public recycling bins for each type of material.
- The product does not contain concentrations of
substances that could be considered harmful to
the environment.
This symbol means that in case you wish
to dispose of the product once its working
life has ended; take it to an authorised
waste agent for the selective collection of
Waste from Electric and Electronic
Equipment (WEEE).
The following information is regarding to energy
labelling and ecodesign:
Trade mark:
Model:
Efficiency class
Annual energy consump-
tion:
Indicative annual energy
consumption (kWh per
year), based on 50 clean-
ing tasks. Actual annual
energy consumption will
depend on how the appli-
ance is used
Carpet cleaning perfor-
mance class
Hard floor cleaning perfor-
mance class
Dust re-emission class
Sound power level
Rated input power
To establish compliance with the ecodesign
requirements and for calculation of energy
labelling parameters the appliance is considered
as general purpose vacuum cleaner and the
European standards EN 60312-1, EN 60704-2-1,
EN 60335-2-2 are used as reference.
This appliance complies with Directive 2014/35/
EC on Low Voltage, Directive 2014/30/EC on
Electromagnetic Compatibility, Directive 2011/65/
EU on the restrictions of the use of certain
hazardous substances in electrical and elec-
tronic equipment and Directive 2009/125/EC on
the ecodesign requirements for energy-related
products.

WARRANTY AND TECHNICAL ASSISTANCE

This product enjoys the recognition and protec-
tion bof the legal guarantee in accordance with
current legislation. To enforce your rights or inter-
ests you must go to any of our official technical
assistance services.
You can find the closest one by accessing the
following web link: www.mellerware-home.com.
You can also request related information by
contacting us. You can download this instruction
manual and its updates at www.mellerware-home.
com
MELLERWARE
RIDER 2.0
A+
22,0 kWh/año
E
B
E
80 dB
600 W