Assembly; Unpacking; Mounting: Canister - Electric Suction Brush - Fakir nilco Premium 1107 Instrucciones De Uso

Unpacking

Mounting
B
E
C

Assembly

Unpack the appliance and check the contents for
completeness.
(see page 28 "Scope of delivery")
Sort the packaging material and recycle accordingly.
If you detect damage from transport, contact your retail
dealer immediately.
Never use a defective appliance.
Prior to assembly, make sure that the mains plug is un-
plugged. If the mains plug is plugged in, the appliance
could accidentally be switched on, resulting in injuries.
Canister – electric suction brush
Press the pivot bracket [A] forward until it locks into po-
sition.
A
B
Fasten the canister with the two knurled screws, which
are included [C].
D
Plug the electric connecting cable [D] of the suction
brush into the socket on the canister [E].
WARNING!
WARNING!
B
Place the canister [B] on the
pivot bracket. Slide it back un-
til the slots at the bottom of
the canister fit around the
front edge of the pivot bracket
bow.
GB
29