Changing The Player Settings - Panasonic DVD-LS92 Instrucciones De Funcionamiento

Changing the player settings

● Referring to the table below, change as required.
● Underlined items are the factory presets.
● Items shown differ depending on the type of software.
The settings remain intact even if you switch the unit to standby.
1
SETUP
(Remote control)
Setup
Display
Language ：English
Subtitle
：English
Video
Audio
：English
DVD Menu
：English
Audio
Subtitle Text
：Latin2
Others
Set
Return
"Language" tab
Display
Subtitle
Audio
DVD Menu
Subtitle Text
"Video" tab
TV Aspect
TV System
Effective only when you
connect Audio/Video cable to
this unit.
"Audio" tab
Dynamic Range
"Others" tab
Restore Default Settings
System Information
DivX VOD Registration
®
DivX VOD deactivation
®
Set Password
Ratings
2
or
OK
(Remote control)
● Press [e r w q] and [OK] to set.
● To enter number: press [e r] to select.
● To return to the previous screen: Press [RETURN].
● To exit the screen: Press [RETURN] several times.
● English ● Deutsch
● Nederlands ● Svenska
● English ● German
● Dutch ● Swedish
● English ● German
● Dutch ● Swedish
● English ● German
● Dutch ● Swedish
● Latin1 ● Turkish
Choose the setting to suit your television and preference.
● 4:3 Pan&Scan: Regular aspect television (4:3)
The sides of the widescreen picture are cut off so it fills the screen (unless
prohibited by the disc).
● 4:3 Letterbox: Regular aspect television (4:3)
Widescreen picture is shown in the letterbox style.
● 16:9: Widescreen television
Use the television's screen modes to change the way the picture is shown.
● NTSC: Output signals from all discs remains as NTSC.
● PAL: Output signals from all discs remains as PAL.
● Off
● On: Adjusts for clarity even when the volume is low through compressing the range of the
lowest sound level and the highest sound level. Convenient for late night viewing. (Only
works with Dolby Digital.)
This returns all values in the Setup menu and the on-screen menu, except for "Set Password"
and "Ratings" to the default settings.
Display firmware version of this unit.
You need this registration code to purchase and play DivX Video-on-Demand (VOD) content.
(→ 12)
Cancel the unit's registration. (→ 12)
Press to set password.
● Enter the default password "8888" then set your password.
Setting ratings (When level 8 is selected)
● 1 to 7: To prohibit play of DVD-Video with corresponding ratings recorded on them.
● 8 No Limit
When setting a ratings level, a password screen is shown. Follow the on-screen instructions.
Do not forget your password.
A message screen will be shown if a DVD-Video exceeding the ratings level is inserted in the
unit. Follow the on-screen instructions.
OK
● Français ● Español
● Polski
● French ● Spanish
● Polish ● Off
● French ● Spanish
● Polish
● French ● Spanish
● Polish
● Latin2 ● Cyrillic
● Italiano
● Italian
● Italian
● Italian
15
15