Playing Discs - Panasonic DVD-LS92 Instrucciones De Funcionamiento

Playing discs

OPEN
Open the lid.
Click into
place
Insert a disc and close the lid.
● Load double-sided discs so the label for
the side you want to play is facing up.
● Some discs start to play automatically
when the unit is on.
● To change the language on the display → 15, "Language" tab
● While stopped, the unit automatically turns off once about 15 minutes (about 5 minutes when using the battery pack) have
elapsed.
● Total title number may not be displayed properly on +R/+RW.
● If you are experiencing problems, refer to troubleshooting guide (→ 18).
● During playback of DTS source, there will be no sound from the speakers. Select a different audio source (e.g. Dolby Digital).
Note
DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED. Press [g –OFF] when you finish to preserve the unit's
motor.
8
8
Headphone terminals [W]
ø 3.5 mm stereo mini jack
ON
Press.
The unit turns on and play begins.
● Press [AV SELECT] to select "DISC"
or "USB".
AV SELECT
VOL
Adjust the volume.
When using headphones,
turn down the volume before
connection.