Ribimex Ribiland PRTRE200T/1 Manual De Instrucciones página 5

Use the Pruning Saw for cutting wood only.
Do not use the Pruning Saw for not intended purpose.
Do not use for cutting non-wood items.
Keep the product away from children or from their environment.
Never allow children to operate the Pruning Saw. Children should be supervised to ensure
that they do not play with the appliance.
Only well- instructed adults should operate Pruning Saw.
This product is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
Operate only under electrical voltage noted on rating plate of Pruning Saw.
Use only extension cords marked for outdoor use. See Operations section extension cord
requirements.
Do not operate Pruning Saw:
- While under the influence of alcohol, medications, or drugs.
- In rainy weather, damp environment or wet areas.
- Where highly flammable liquids or gases are present
- If Pruning Saw is damaged, wrongly adjusted, or not fully and securely assembled.
- If trigger does not turn on and off the Pruning Saw.
Chain must stop moving when you release trigger. Faulty switch must replaced by
authorized service centre.
- While in a hurry.
- While in tree or on a ladder.
- While on aerial booms, buckets or platforms.
- During high wind or stormy weather.
When operating Pruning Saw wear personal protective equipment or safety gear :
- heavy-duty gloves (wear rubber gloves when working outdoors)
- steel-toed safety footwear with non-slippery soles
- eye protection such as safety glasses, goggles, or face screen.
- safety helmet
- ear mufflers or ear plugs.
- contain long hair with hair-net
- face or dust mask (if working in dusty areas)
Before cutting, ensure on the following:
- wear snug-fitting clothes when operating Pruning Saw.
- do not wear loose clothing or jewellery. They can get caught in moving saw chain
- clear working area
- secure footing
- plan a retreat path from falling limbs
- inspect tree before trimming. Make allowance for branches to fall freely to the ground.
- do not use your Pruning Saw to fell saplings.
Page 5