Ribimex Ribiland PRTRE200T/1 Manual De Instrucciones página 7

Both items reduce the chance of kickback. Kickback can still occur with this Pruning
Saw.
Use both hands- one gripping the trigger and the other gripping the pole.
Use firm grip. Thumbs and fingers must wrap around trigger and pole.
Keep all safety items in place on Pruning Saw. Make sure they work properly.
Do not overreach or extend arms above shoulder height.
Keep solid footing and balance at all times.
Never try cutting through two branches at the same time. Only cut one at a time.
Do not bury guide bar nose or try plunge cut (boring into wood using guide bar nose)
Watch for shifting of wood or other forces that may pinch chain.
Use extreme caution when re-entering a previous cut.
Use low-kickback chain and guide bar supplied with the Pruning Saw.
Only use replacement parts listed for the Pruning Saw.
Never use dull or loose chain. Keep chain sharp with proper tension.
TRIMMING PRECAUTIONS
Never stand directly under the limb you are trimming.
Always position yourself out of the path of falling debris.
Never stand on a ladder or other type of unstable support while using the Pruning Saw.
Always use both hands to operate Pruning Saw.
Keep a firm, steady pressure on the Pruning Saw while cutting but do not try to cut limbs
larger in diameter than the length of the guide bar.
Keep other persons away from cutting end of Pruning Saw and at a safe distance from
work area.
Do not use Pruning Saw near cable, electric power or telephone lines. Maintain a
minimum clearance of 10 feet from all power lines.
IV – G S
ETTING TARTED
UNPACKING
Remove all items from carton.
Check items for any shipping damage.
If you find any damage or any parts are missing, inform your dealer.
ACCESSORIES
The Pruning Saw comes with following accessories:
Saw Chain 1pc
Guide bar 1pc
Hex Key 1pc
Oil bottle 1pc
Cable clip 1pc
Cutting Head Cover 1pc
Shoulder Strap 1pc
Page 7