TECALEMIT TankQuick VAG Instrucciones De Servicio página 20

Hydraulics
Only persons with special knowledge and experience with hydraulic systems may
carry out work on hydraulic parts and equipment. All lines, hoses and screw joints
should regularly be checked for leaks and visible external damage. Any damage must
be rectified immediately. Any oil spurting out can cause injuries and fire.
The relevant safety regulations for the product must be followed when handling oils,
greases or other chemical substances!
Maintenance and Service
According to the regulations of the water resources law only authorized services may
work on devices for flammable and/or water endangering substances. During such
works, appropriate tools are to be used (avoid sparking). Before any kind of work on
the device, all fuel lines are to be completely emptied and aerated.
Do not make any changes. Modifications or additions to the device which may affect
the safety cannot be carried out without consent of the manufacturer. Exclusively
genuine spare parts made by the manufacturer may be used.
Electric power
Work on the electrical equipment may only be carried out by a qualified electrician or
by trained persons under the guidance and supervision of a qualified electrician ac-
cording to electro-technical guidelines. Machine or system components, on which in-
spection, maintenance or repair work is to be carried out must be de-energised.
Explosion Protection
The device is constructed for use with explosive substances. The design and pro-
duction have been effected under observance of the valid regulations, especially
regulation 94/9/EG (ATEX 95) and the technical rules. The operator has to observe the
regulations concerning the operation of such devices, especially the regulation
1999/92/EG (ATEX 137) and the operational safety regulations (BetrSichV).
20 44 1374 001-H TankQuick VAG