Product Description; Assembling Vacuum Cleaner; Maintenance After Use - Beper 50.918 Manual De Instrucciones

Ash Vacuum Cleaner Mangiacenere Use instructions

PRODUCT DESCRIPTION

1 - Metal Pipe
2 – Carry handle
3 - Connector for the suction pipe
4 - Power button 0 / I
5 - Engine
6 - Power cord with plug
7 - Closing hooks
8 - Tank (stem) steel
9 - Connector for the spear
10 - Aluminum spear
11 - Hepa filter
12 - Fixing plates for the filter
13 - Screw to fix the filter

ASSEMBLING VACUUM CLEANER

Always remove the plug from the power socket before fitting or removing accessories!
A) Take all the accessory out
B) Put the tube to the handle of hose
C) Fitting the flexible hose
Insert flexible hose into the air intake duct on the top of appliance. Press until it clicks into position.
INSTRUCTIONS FOR USE
1) Press the ON/OFF button to switch the appliance on. Fig 2
2)When finished cleaning ,switch off and removing the plug from the power socket. To release the
flexible hose firmly from the air intake duct. Then to dump the dust from the collect tank . FIG 3

3) MAINTENANCE AFTER USE

Screw off the filter screw in the end and take the filter out for cleaning or charge
Follow FIG 4 process for taking off the filter
Follow FIG 4 process for assembling back and keeping the filter
Cleaning filter
Filter should be cleaned at least twice a month or when it becomes visible solid.
Always operate the cleaner with filter installed.
Otherwise, reduced suction or motor damage may be result.
Disconnect from electrical outlet, before cleaning filter.
Do not use a washing machine to rinse filter.
Do not use hair drier to dry it.
10