Normative References; Foreseen Use Of The Machine; Machine Description - IMER TERRA Serie Manual De Uso, Mantenimiento Y Recambios

Sierra de juntas
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

- Any movement of the machine outside the
2
cutting area must be carried out with the tool
stopped.
3
- Danger, risk of cutting
- Reading the operator's manual is compul-
4
sory
5
- Ear protection is compulsory
6
- Wearing safety shoes is compulsory
- CE marking: machine identi cation cha-
7
racteristics.

5- NORMATIVE REFERENCES

e IMER JOINT CUTTER has been designed and manufactured applying the
following standards: UNI EN 12100; UNI EN 13862.

6- FORESEEN USE OF THE MACHINE

Use is foreseen in construction sites in normal temperature (0° - 40°C) and hu-
midity (90% max. at 20°) conditions.
must not be below 500 LUX in the cutting area.
e JOINT CUTTER has been designed for cutting only asphalt and concrete.
Do not use it to cut metal materials, wood or anything else not speci ed herein.
e maximum cutting capacity with 450 mm disk diameter is 165 mm.
Only use cutting disks suitable for the type of material to be cut and follow the
indications given on the disk.
Use disks clearly stating the maximum rpm for use, the type of material that can
be worked and the type of cutting (in our case wet cutting). IMER INTERNA-
TIONAL discs provide the necessary data for correct use.
IMER INTERNATIONAL DECLINES ANY LIABILITY FOR ANY IMPRO-
PER USE OF THE MACHINE.

7- MACHINE DESCRIPTION

e TERRA 450 asphalt cutter features a sheet iron structure (frame), which
o ers excellent resistance combined with considerable lightness. In addition
the engine support is assembled on the frame; it's thickness ensures maximum
sti ness and e ective damping of vibrations also reduced by the use of special
rubber vibration dampers.
e pivot engine mounts, on which turns the disc
sha , are assembled on the engine support.
the moving parts are xed to the frame.
e inclination of the machine and therefore the cutting depth, is variable
through a trapezoidal screw operated by a hand-wheel located on the control
panel.
e engine support is ' xed to the frame with a special anti-vibration system.
Other vibration dampers are placed between the frame and the machine guide
arms.
e gripping points, tted with vibration-damping knobs, are positioned
in such a way as to minimise operator e ort in pushing the machine and they
are adjustable.
On the frame there is the housing for the auxiliary cutting cooling water tank,
which is easily removable. On the disk guard there is the connection for sending
water to the disk, complete with tap and fitting for direct connection to the tank
or the water mains. On the machine there is the parking brake, which is ope-
rated by turning the handwheel anticlockwise Fig.1 Ref.1 on the control panel,
IMER INTERNATIONAL S.p.A.
TERRA 450
e natural or arti cial lighting foreseen
e various protective guards for
until' the braking device Fig.1 Ref.2 forces on the wheel.
To handle the machine easily, it must be raised to the maximum height by tur-
ning the handwheel until it stops. In this case, the brake will 'position as in
Fig.1 Ref.3
2
For the cooling of the disc, alternatively at reservoir of the machine, can use
an auxiliary tube that comes from another tank or mains water supply directly.
See Fig.1.1
e machine is delivered packed on a pallet. In these conditions it is handled
by fork li truck.
Once the packing has been removed the machine can be hoisted using a winch,
removing the water tank and securing the tie rod in the prearranged point as
in gure 2.
17
1
3
Fig.1
1
Fig.1.1
GB

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Terra 450Terra 500

Tabla de contenido