Setting Capture Format Photo/Video; Setting Tv System Ntsc/Pal; Use Of The Sd Memorycam2; Record Mode - Marmitek SD MEMORY CAM2 Manual De Instrucciones

when you turn the motion detection on. Don't walk through the detection area when in 'self-learning
mode', because it will lower the detection sensitivity. When it triggers, the icon will become green and
a picture (jpg) or video (AVI) will be taken.
Note: 'UP ARROW' key (2, fig. 1) also functions as a direct assess for setting motion detection mode 'ON'
and 'OFF' when the SD recorder is in standby mode.
Note:
• Motion detector will always be on when the appliance has been switched off, this is the SD recorder's
default setting.
• Don't use the motion detector when the picture-in-picture function is switched on too.

Setting capture format photo/video:

• Press 'MENU' button to enter setup mode.
• Select this or this
Note: 'DOWN ARROW' key (4, fig. 1) also functions as a direct assess for selecting the format of photo
or video, when the SD recorder is in standby mode.

Setting TV system NTSC/PAL:

• Press 'MENU' button to enter setup mode.
• Select this or this
Note: In setup mode, press 'MENU' to return to standby mode.

4. USE OF THE SD MEMORYCAM2

Record mode:

In order to prevent and avoid false triggers, we recommend:
• Do not aim camera at the sun.
• Aim away from constant moving objects.
• Avoid mirror and reflected light from bright surfaces.
• Avoid areas which have shadow variation.
• Bright areas will be more sensitive than dark areas.
When memory is full, the icon that is next to the motion detection icon will become red and the memory
will overlap (according to the FIFO principal 'First in-First out').
Note: Always restart the recorder when system malfunctions or crashes.

Play mode:

The pictures stored on the SD card can't be displayed on general digital cameras. To view the recorded
images using the SD recorder, take the following steps.
1. Auto single- picture review:
Press 'PLAY' button to review captured images or videos. Press 'RIGHT' or 'LEFT ARROW' key to start
the slide show program to forward or reverse the pictures automatically. Press button again to stop
and stay at the picture you want to review. Press 'RIGHT' or 'LEFT ARROW' key again to continue
the slide show .
The date/time display may be hidden when you press on the 'UP ARROW' key in the play mode. Press
on this button again to make the date and time code visible again.
2. Six-picture review:
When the SD recorder is in the reproduction mode, press 'PLAY' to enter the overview mode. Use
'UP', 'DOWN', 'RIGHT' and 'LEFT ARROW' keys to select the picture you wish to review and then
press 'OK' to open it. Press 'PLAY' again to return to the overview mode.
10
icon and press 'OK' button to confirm the selected format.
icon and press 'OK' to switch TV system NTSC (America) or PAL (Europe).
© MARMITEK