AGI 1805S Instrucciones Originales página 78

Note: See "Install Sidewall Stiffeners" on page 82 for the diameter and length of bolts
used to connect the baseplate to the stiffeners and sidewall.
4. ARMADO
For detailed information about anchor bolt placement, see Figure 4.81.
Figura 43. Placa base del refuerzo laminado
Figure 4.79 Laminated Stiffener Baseplate
4" C C
ORRUGATED OMMERCIAL
60', 72', 75'
Figura 44. Placa base del refuerzo no laminado
Figure 4.80 Non-Laminated Stiffener Baseplate
104
Note: Short shims are required to make up for the heights of the bottom angle. The
standard shim is used to make up for unevenness in the concrete surface, and
ensure all baseplates are level.
Important: All bolts that secure the baseplate and laminated stiffeners to the bin must be
78
inserted from inside the bin, and the nut added and tightened on the outside.
SILO DE ALMACENAMIENTO CON FONDO DE TOLVA Y FONDO PLANO – SERIE AGRÍCOLA
F B S B
LAT OTTOM TORAGE INS
5
7
6
5
4
4.26. A
NCHOR THE
7
6
4
CORRUGADA DE 4 IN
1
2
3
4. A
SSEMBLY
B F
IN TO THE OUNDATION
ENM-18893 R2
1
3
2
ES-ENM-18914 R0