Página 1
User’s manual Manual de usuario FR-X212 Stacking kit for X212AF on X218WF Kit para stacking de X212AF sobre X218WF December 2019...
Página 2
FR-X212 Dec 2019 The FR-X212 is an optional accessory for stacking the X212AF on X218WF subwoofers. El FR-X212 es un accesorio opcional para el stacking de la X212AF sobre los subwoofers X218WF. Stacking frame FR-X212 Estructura stacking FR-X212 1- Place the FR-X212 stacking frame on the X218WF subwoofer. The lateral bars must face upwards.
Página 3
2- Lock the FR-X212 stacking frame with the M10 locking screw. Blocar la estructura FR-X212 mediante el pomo de fijación de M10. 3- Set the first X212AF cabinet on the FR-X212 lateral bars and back guide (join points A-A1 and B-B1).Use the X212AF ball lock pins to fix both structures.
Página 4
FR-X212 Dec 2019 4- Choose the desired angle for the first cabinet. Escoja el ángulo deseado para la primera caja. 0º Amate Audio...
Página 7
FR-X212 Dec 2019 5- Set the other X212AF cabinets over the first unit of X212AF and tilt them as per your requirements. Coloque las siguientes unidades X212AF encima de la primera unidad X212AF y graduar según las necesidades. IMPORTANT NOTE: To avoid any instability we recommend you:...
Página 8
FR-X212 Dec 2019 c) For a stacking of up to three units of X212AF: If the first cabinet is at -2º or -4º, the next cabinet (second one) may have a maximum tilt angle of 8º. The third cabinet may have a maximum tilt angle of 8º.
Página 9
FR-X212 Dec 2019 d) For a stacking of up to three units of X212AF: If the first cabinet is at +2º, the next cabinet (second one) may have a maximum tilt angle of 6º. The third cabinet may have a maximum tilt angle of 8º.