Ironing With Steam Blast; Taking The Steam Iron Out Of Service - Kasanova SWO000016 Manual De Instrucciones

CORDLESS IRON
• Select the best suitable temperature setting with the temperature controller
(7).
• The control lamp for the temperature (6) glows. When the set temperature
has been reached, the temperature control lamp goes out.
• Wait until the temperature control lamp extinguishes.
• To moisten the laundry, press the spray button (4).
This function is suitable for every dry and very crumpled garment.
STEAM IRONING
• Program the steam iron regulator (3) to the desired steam setting.
• The temperature regulator (7) must be turned into at least the adjustment
range . Otherwise it cannot produce any steam.

IRONING WITH STEAM BLAST

The steam blast is especially suitable for smoothing difficult to reach parts of a
garment.
• Slightly raise the steam iron.
• For a steam blast, press the steam blast button (5)
Temporarily setting the steam iron aside.
WARNING: Risk of fire
NEVER leave the hot, mains-connected or switched-on steam iron
unattended.
• Place the temperature regulator into the position "MIN".
• Place the steam iron only on the cable base or insert it onto the station.

TAKING THE STEAM IRON OUT OF SERVICE

• Remove the plug from the wall power socket.
• Empty the water tanks and clean the ironing sole (13).
• Place the cooled sown steam iron on the station and secure it, in that you
slide the unlocking switch (10) into the position
• The power cable (9) can be wrapped and stored around the cable retainer
(12) on the underside of the station.
.
.
15